QUAD 1000 OWNERS MANUAL – OPERATION GUIDE Built in Redmond Oregon USA www.laserlinemfg.
COMPONENTS 4001-0000 Quad 1000 5 arc second zenith laser featuring electronic servo self-leveling with variable temperature compensation for the most accurate and consistent readings. Features downward shooting laser plumb-bob for getting over your point, upward zenith laser to 1,200 feet (366m), one button operation with LCD display and up to 140 hrs. battery life. 4200-0000 Trivet Floor Mount with a 5/8 x 11 thread mount and adjustable legs.
OVERVIEW The Quad 1000 projects a precise laser beam straight up (Zenith) to 1,200 feet/366m for the purpose of providing plumb control for your project. It also features a short range downward shooting laser beam that is used like a plumb-bob or optical tribrach to easily get directly over your point. The Quad 1000 is a self- leveling instrument with electronic temperature compensation.
SETTING UP USING THE TRIVET MOUNT: This is the preferred method. It keeps the instrument low to the deck and closer to your reference point. Also, since the unit is only about five inches off the ground it won’t be so vulnerable to getting knocked over like with a tripod. A) B) C) D) Attach the Quad 1000 to the trivet using the spring loaded 5/8 x 11 mounting bolt. Place the trivet over your reference point on the ground floor.
SETTING UP (CONTINUED) PLACING THE QUAD 1000 DIRECTLY ON THE DECK / SLAB REFERENCE POINT (Flat / level surface ground floor) A) Using a pencil and a square, or the notched target provided, draw a line through and across the center of your reference point extending about 6 inches on either side of center. Next, draw a line through the center at 90 degrees from the first line at about the same 6 inch length from the reference point.
JOBSITE CALIBRATION CHECK 1. Using the trivet mount, tripod or deck / slab mount as shown in “Setting Up” get the Quad 1000 precisely over your reference point on the ground floor. 2. Place the target / template precisely centered on the laser spot at the highest point possible above the Quad 1000. (At least 100 feet if possible) Secure the target so it will not move. 3. Rotate the Quad 1000 180° and very precisely set it over the reference point. 4.
LABELS (Required for this product) Non-Interlocked Identification – Serial Protective Housing: IEC Compliance: Danger Logo Type: QUAD 1000 SPECIFICATIONS Laser Laser Type: 635nm Laser Power: 4.5mw up / 1.0mw down Laser U.S.A. CDRH Class IIIa International IEC 825-1 class 3R U.S.A OSHA compliant: Meets all Federal and International standards Plumb Beam Down Accuracy / Range: 1 arc min. @ 15ft. (4.
WARRANTY This product is guaranteed against defects in materials and workmanship for both parts and labor, under normal working conditions for two years from the date of purchase, except as noted herein. LaserLine Mfg., Inc. liability under this warranty is limited to repairing or replacing any product returned to an authorized service center for that purpose. Any evidence of attempts to repair this unit by other than factory authorized personnel automatically voids the warranty. LaserLine Mfg., Inc.
