Product Manual

•Place laser detector
on E-Z Read Rod at
Zero Point.
•Set E-Z Read Rod at
starting elevation and
run top section down
to pick up ‘on grade’ on
laser detector.
•Lock knob.
•Set E-Z Read Rod where you
want to take a reading.
•Run laser detector up or down
to pick up ‘on grade’ signal.
•Read the exact elevation
difference from your
starting point.
(Low 4 tenths of a foot in this example.)
•No math required!
LASER USE
•Set E-Z Read Rod on
starting elevation
•Run E-Z Read Rod
top section down to
intercept zero point on
rod with instrument
crosshair.
•Lock knob.
•Set E-Z Read Rod where
you want to take a
reading.
•Read scale at crosshair.
•Reads the exact
elevation difference
from your starting point.
(Low 2 tenths of a foot in this example.)
•No math required!
OPTICAL USE
1810 SE First Street, Suite H, Redmond, OR 97756 • Phone [phone] • Fax [phone] • www.LaserLineMfg.com
Highest Quality - Most Versatile
The E-Z Read Rod has a fixed scale running away from a zero point up and down the rod face
depicting how high or low you are from your starting elevation. The starting elevation is always zero
and all grade shots are relative to that point. The E-Z Read Rod does the adding subtracting for you
so no math is required. As a result, it is much faster and easier to use than a standard grade rod.
The E-Z Read is perfect for virtually all general construction application; such as setting
forms, establishing footing elevations, screed work, subgrade, finish floor or virtually any
elevation on the job site.
NO more adding, NO more subtracting, NO more errors.