Users Manual

ABOUT SEARCH SUPPORT HELP PRIVACY BLOG
HOME SHOP
Cart ( 0 )
SETUP WIRELESS-X HDMI DONGLE
AndroidAndroid
CONNECT THE DONGLE
OPTION 1 - DONGLE POWERED BY TV
1. Connect the 3-END CABLE to the WIRELESS-X dongle.
2. Plug-in the dongle directly into an HDMI port on your TV.
3. Plug the USB-END to USB port labeled 5V/1A on your TV.
4. Place the ANTENNA-END of cable at a location with good WiFi
reception.
5. Turn ON the TV and select the Input to the HDMI port.
6. Wait few seconds until dongles' SSID and Password appears on the TV
screen.
OPTION 2 - DONGLE POWERED BY POWER ADAPTER
1. Connect the 3-END CABLE to the WIRELESS-X dongle.
2. Plug-in the dongle directly into an HDMI port on your TV.
3. Plug the USB-END to power adapter labeled 5V, 1A.
4. Plug the power adapter to power outlet.
5. Place the ANTENNA-END of cable at a location with good WiFi
reception.
6. Turn ON the TV and select the Input to the HDMI port.
7. Wait few seconds until dongles' SSID and Password appears on the TV
screen.
Warning: Make sure the Antenna-End is located as much as possible from TV body, power outlets/adapters, any cables, especially power cable.
SETUP THE DONGLE
Find Dongle SSID on the top of the TV screen. The password is not necessary for screen mirroring on the Android platform.
START MIRRORING PHONE SCREEN
(refer to LaserHIT XXX instead of MiraScreen XXX on the images below)
SAMSUNG
HUAWEI
SONY
LGE
MOTOROLA
HTC
ONEPLUS
MEIZU
LENOVO