Users Manual

ABOUT SEARCH SUPPORT HELP PRIVACY BLOG
HOME SHOP
Cart ( 0 )
SETUP WIRELESS-X HDMI DONGLE
iPhoneiPhone
CONNECT THE DONGLE
OPTION 1 - DONGLE POWERED BY TV
1. Connect the 3-END CABLE to the WIRELESS-X dongle.
2. Plug-in the dongle directly into an HDMI port on your TV.
3. Plug the USB-END to USB port labeled 5V/1A on your TV.
4. Place the ANTENNA-END of cable at a location with good WiFi
reception.
5. Turn ON the TV and select the Input to the HDMI port.
6. Wait few seconds until dongles' SSID and Password appears on the TV
screen.
OPTION 2 - DONGLE POWERED BY POWER ADAPTER
1. Connect the 3-END CABLE to the WIRELESS-X dongle.
2. Plug-in the dongle directly into an HDMI port on your TV.
3. Plug the USB-END to power adapter labeled 5V, 1A.
4. Plug the power adapter to power outlet.
5. Place the ANTENNA-END of cable at a location with good WiFi
reception.
6. Turn ON the TV and select the Input to the HDMI port.
7. Wait few seconds until dongles' SSID and Password appears on the TV
screen.
Warning: Make sure the Antenna-End is located as much as possible from TV body, power outlets/adapters, any cables, especially power cable.
SETUP THE DONGLE (1st time)
1. Find Dongles’ SSID and Password on the top of the TV screen.
2. On your iPhone go to Settings -> WiFi -> Choose a Network… and select LaserHIT XXX.
3. Enter the password.
4. Verify the phone connected to the dongle (wait for blue check mark appears).
5. Verify the dongle connected to the phone (wait for blue bubble appears).
MIRRORING iPHONE SCREEN
START MIRRORING iPHONE SCREEN
1. Swipe-up on the iPhone screen (Swipe-down on iPhone X) to open
short-cut settings.
2. Tap on Sc re e n M i rroring a n d s e l ect Lase r H I T X X X.
3. Wait for the Phone screen appears on your TV.
4. You are a l l s e t . Open La s e r H I T app and s t a r t p ractice.
STOP MIRRORING
1. Swipe-up on the iPhone screen (Swipe-down on iPhone X).
2. Tap on Sc re e n M i rroring b u t t o n with Las e r H I T X XX label .
3. Tap on St o p M i r roring.