Users Manual
7
5. Installation
Laserglow's SPDS is designed with the customer in mind for easy installation without the help of an
installer. The powerful magnet on the bottom of the VT attaches easily and securely to vehicles and
can be easily detached using the detach lever.
In situations where there's no magnetic surface to mount using magnet, VT can be secured with zip
ties.
It is better to install VT in a 360Ëšopen space (on top of vehicle cabin for
example), rather than a space inside the cabin. As a wireless frequency(RF)
device, this will allow better communication between devices.
Setting
Tips
Caution!
It is highly recommended to install SPDS with the power off.
Turn on the power after connecting all components.
Magnetic Pad
: Easy to install
Pedestrian Tag Helmet Clip
Detach lever
: Easy to detach from
vehicle by pulling the lever as shown
Fastening Tie Hole
* Caution! Fully tighten cable terminals to ensure
proper connection and water-tight seal.
* Normal operation: Green Flashes ON after turning on the power.
Cable Harness(6m)
3m
5m
Open Wire Adapter Cable
Car Adapter
or
Vehicle Tag(VT)
Indicator