Users Manual

11
How to Register Driver Tag
How to Release Driver Tag
How to Deactivate Driver Registration Function
N
O
T
E
6. Setting - Pedestrian Tags
(Driver Mode)
Once Driver
Registration
Function is
completed, connect
the indicator to the
vehicle.
Set the Driver Registration Function ON by using SPDS Toolkit.
(Please refer to SPDS Toolkit User Manual for more details.)
Set the Driver Registration Function OFF by using SPDS Toolkit.
Place the PT within
1m range from
the VT.
Press and hold
SET2 button for
2 seconds.
Press and hold
SET2 button for
2 seconds.
PT is registered as
a driver tag with
the voice message.
"Registered."(The
beep sound will
occur in case of
failure.)
PT is released as a
normal tag with
a beep sound.
Driver Mode is a function that deactivates PT of a driver who frequently drives
vehicles. Prior to set the Driver Mode below, PC program "SPDS Toolkit" setting
must be completed.
1. Only 1 PT per 1 Indicator is
available for registration (Release
the existing registered PT prior to
register another PT as a driver tag).
2. Driver Tag is automatically released
once the power is OFF.
Registered.
Beep-