Users Manual
10
6. Setting - Pedestrian Tags
Alarm type Setting
Volume Control
① Press and hold the
power button to
turn on the power.
(Charging is required
if the red LED is on.)
① Press and hold the
power button to turn
on the power.
( Charging is required if
the red LED is on.)
② Press and hold the
menu button.
( A short vibration will
occur.)
② Press and hold the
menu button.
( A short vibration will
occur.)
③ Press the power
button to set the
desired alarm type.
( Please refer to the
alarm system below.)
③ Press the menu button
to set the desired
volume level.
( See volume steps
below.)
④ Press and hold the
menu button to
complete the setup.
④ Press and hold the
menu button to
complete the setup.
Sound
Default
Status
(Sound +
Vibration)
Vibration
Press
Power button
1 time
> > >
> >
>
Press
Power button
1 more time
Press
Power button
1 more time
Press Power button
1 more time
Sound
+
Vibration
Alarm
Volume 3
Default
Status
(Stage 3)
Volume 2
Press
Menu button
1 time
> > >
> >
>
Press
Menu button
1 more time
Press
Menu button
1 more time
Press Menu button
1 more time
Volume 1
Volume Stage