Users Manual
Rev. 1
Laserglow Technologies
Smart Proximity Detection System (SPDS)
User Manual
Flashing Vehicle Beacon (FVB)
Vehicle Tag(VT)
Risk of collision with a forklift outdoors
· Function: Operate the lamp and alert by detecting
vehicle tags when vehicles approach the warning zone
· Alert : Beeping Indicator
· Alert :
Danger Area - "Vehicle is approaching to the danger area."
Caution Area - "Vehicle is approaching to the caution area."
Dummy flash light interlocks with FVB. It is suitable
to avoid collisions caused by limited visibility at the
corner or the entrance.
▶ Flashing Vehicle Beacon (FVB)
▶ In case of installation of optional devices(Amp/Speaker)
▶ In case of installation of optional
device (Dummy Flash Light)
SPDS Flashing Vehicle Beacon (FVB) is a safety-assisting device
which prevents collisions among pedestrians, vehicles and obstacles
in a blind spot.
It is possible to adjust distance setting with buttons on the product.
This product makes signal by detecting vehicle tags around to help
pedestrians avoid dangerous situations.
High accuracy of UWB based proximity detection is an advantage of
Laserglow Technologies SPDS. The product is available without any
registration or rectification during installation.
※ This product is associated with Vehicle Tag (VT).
For more information on installation and usage of VT, please
refer to VT/PT Installation Guide and User Manual.
· Do not intentionally immerse the product in water or wash it in
running water. This may cause permanent damage.
· Do not place the product near flammable materials, stoves, candles,
or fire. This may cause fire and product deformation.
· If the product smells, smokes, or makes abnormal noises, turn off the
power and contact the customer service center immediately.
· Do not touch the connector or wiring with wet hands. This may cause
electric shock or fire.
· If a connector or a wiring gets wet, wipe it with a dry towel. Otherwise, it
may cause electric shock or fire.
· Do not place heavy objects on the product or on wiring, or shock. It
may cause electric shock or fire.
Caution/Warning for Safety
※ Some features may change without prior notice to improve the performance of the product.
Specifications
Flashing Vehicle Beacon (VB)
Power
12/24V DC Input (9/32V DC)
Current
500mA
Interface
CAN Bus 2.0
Signal Status / Alert Type
· No approach : No signal
· Approach Warning : Lamp / Alert
or voice alert(Optional)
Sound Level / @Distance
88dB / 1m
Size
Ø 122.7 × 140.6 × 111.5mm
Weight
483.5g
Color
Red / Amber
Mounting Method
Magnet Mount Type or Bracket Type
Operating Temperature
-30 ~ 85°C
Storage Temperature
-40 ~ 85°C
Waterproof
IP65
Electrical Feature
Mechanical
Feature
Opereation
Specification
· Do not disassemble or modify this product. This may cause
permanent damage, and After-Sale Service will not be available.
Any accidents that result from not following the instructions in this manual
are the user’s responsibility.
·Model No : SPDFVB
·FCC ID : 2AWBN-SPDFVB
·IC ID: 26108-SPDFVB
·Manufacturer : Laserglow Technologies / CANADA
This device complies with part 15 of the FC
C Rules. Operation is subject to the
following two conditions : (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
Caution : Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Note : The following statement applies to all products that bear the FCC logo on the
product label. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. See 47 CFR Sec. 15.105(b).
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures :
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
· Consult the dealer or an experienced radio/TV technician for help.