Manual Smart Solar Powered Water Controller (CSH-WTRCTRLR / LSH-WTRCTRLR) TAP HERE 1 GET THE APP QR Codes for Downloading Apps 2 REGISTER no account LOGIN existing account 3 RECOMMENDED APP SETTINGS REGISTER OR LOGIN TO APP
4 POWERING THE WATER CONTROLLER Undo Screw Insert 2 x AA Rechargeable Batteries Solar Panel Undo the screw at the bottom and insert 2 x AA rechargeable batteries into the Water Controller. 5 In strong direct sunlight the Solar Panel on the front of the Water Controller is able to power the device and recharge the batteries POWERING THE GATEWAY Connect the Gateway to a USB Power Adapter using a Micro USB Cable.
6 CONNECTING GATEWAY TO APP Flashing RED Light Press and HOLD pairing button on the Gateway for approx 20 seconds until the LED light starts flashing RED TIP If device not found please check Only 2.
7 CONNECTING GATEWAY TO WATER CONTROLLER With Batteries installed Double Tap the Button on the side of the Water Controller
8 USING THE WATER CONTROLLER Settings Setup Timer or Countdown Check Usage Battery Level Control Valve Open Position
9 CREATING A TIMER SCHEDULE Save Schedule Set Start Time Set End Time Set Day Reoccuring Set Valve Open Position TROUBLESHOOTING 1. The Water Controller is not Connecting to App 2. The Solar Panel is not Working or the Water Controller has no Power • The Water Controller needs the Gateway to work. The Gateway needs to be connected to the App first then the Water Controller to the Gateway. • Please check your Wifi username and password are correct and you are only using 2.