Manual Plug with 2 x USB & Power Monitoring 1 TAP HERE GET THE APP QR Codes for Downloading Apps 2 REGISTER no account LOGIN existing account 3 RECOMMENDED APP SETTINGS REGISTER OR LOGIN TO APP
4 CONNECTING PLUG TO APP While connected to power, press and HOLD button for approx 8 seconds to put device into pairing mode. The LED indicator should start flashing BLUE quickly. TIP If device not found please check Only 2.
5 USING THE PLUG Settings Power ON / OFF Check Energy Usage *only for applicable Power Monitoring models only.
6 PLUG SETTINGS SCROLL DOWN REMOVING PLUG 7 TROUBLESHOOTING 1. If device is not connecting while pairing to the app please check your Wifi username and password are correct and that you are only using 2.4Ghz Wifi connections as the 5Ghz band is not supported. 2. If the device is plugged in and turned on but not showing any signs of power, check any individual power switches that may be on the connected device. 3. All USB plugs and the main socket are controlled by the POWER ON/OFF switch in the App.
