STB-HDM2000 User Manual Please read carefully before use
STB-HDM2000 User Manual Important safety instructions Please read carefully and keep for future reference CAUTION! Do not open. Risk of electric shock! No parts can be repaired by the end-user. Only qualified personnel can repair and maintain this product. If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-sales personnel. Where to install the product • Place the product on a straight and stable place. • Do not place the product on carpet.
Introduction Thank you for choosing this quality Set top box from Laser Co Australia. This device enables you to receive digital free-to-air channels. Table of Contents Front Panel and Rear Panel . ...............................................................................................................................4 Remote Controller ......................................................................................................................................................
STB-HDM2000 User Manual Front Panel and Rear Panel Front Panel 1. 2. 3. 4. MUTE CH+ CHLED DISPLAY 5. STANDBY INDICATOR 6. REMOTE CONTROL SENSOR 7. USB INPUT 1. 2. 3. 4. Antenna Input Spare Antenna Output Video Output HDMI Output 5. 6. 7. 8.
Remote Controller STANDBY: Press to place the unit in standby mode. 2. NUMBER KEYS:Used to select channel numbers or input numbers in menus. 3. TEXT: Used to open teletext OSD display if teletext available in the broadcast stream. 4. MENU: Display main menu on TV screen, press again to exit the menu. 5/23. CH+/CH-: Program changing keys. Move cursor up or down in menu item. 6/21. VOL-/ VOL+: To increase / decrease volume. Or to move cursor left or right in menu item.
STB-HDM2000 User Manual First time installation Start channel installation. For first time use, the automatic installation message will appear on screen. a. Select the menu display language. b. Select the reception country. c. Then, select your time zone . d. Please keep the LCN (Logical Channel Number) option ON (activated), so that the channels can be classified in the correct order. e. Press the Start button to begin the channel search.
the up and down arrow keys to select the level of program rating to be blocked. All programs with this rating and above will require the PIN code to view the program. Change Password To change your password (PIN Code) follow these simple steps: 1. Highlight Change password and press OK to activate the Change PIN dialogue box. 2. Enter the current PIN (default is “0000”) and press OK. 3. Enter your new PIN and press OK 4. Enter your new PIN once again then press OK to verify the change.
STB-HDM2000 User Manual Display problem in HDMI mode If you have selected a HDMI resolution which is not supported by your TV (for example, you have selected 1080i while your TV supports 720p resolution only), a black screen will appear. To solve this problem, press the HDMI button on the remote to change the HDMI resolution. Screen Ratio In this environment you can select the aspect ratio to match your TV, for a widescreen TV or panel version 16:9.
favourites This function allows you to define a list of favourite channels. When you select the menu CHANNEL EDIT, a message will appear to ask you to select whether you want to create a favourite list for DVB-T channels, or for radio stations. a. Press the red button to select a favorite list 1,Press the red key a second time for favorite list 2,and a third Time favorite list 3. b. Press the UP and DOWN keys to select a channel and press OK to add this channel to the selected favorite list.
STB-HDM2000 User Manual Recording and program reminder Record live TV Simply use the “REC” button while viewing the current channel. Schedule record / Reminder Highlight your chosen program and press “OK”. Confirm the schedule recording/ reminder settings and press “OK” to confirm. Notes • Conflicts may occur if 2 or more programs are scheduled for the same time. • Recorded files are designed to play on this unit only. • Recordings are made to a USB flash drive or external hard drive (less than 500GB).
Trouble shooting Symptom Possible Cause Remedy AC power cord disconnected Connect power cord properly into the power socket Incorrect connection of the video/audio output to TV input terminal Connect two terminals correctly with RCA Incorrect Connection of antenna cable Connect the antenna cable correctly Incorrect placement of antenna Adjust the direction of antenna No signal or weak signal Check the cable connections, TV and other equipment connected between the TV and the receiver or adjust t
STB-HDM2000 Digital Set Top Box For technical support please visit www.LaserCo.
