QUICK USER MANUAL 0 SPK-WFADAPTOR
QUICK USER MANUAL SPK-WFADAPTOR Safety Information and Notice - Read all instructions carefully before use. - Retain manuals for future reference. - Use this product only in the manner described. - Only use a water-dampened soft-cloth to clean the surface of this product. - The following will damage this product: any liquid such as water or moisture, extreme heat; cold; humidity, dusty or sandy environments.
QUICK USER MANUAL SPK-WFADAPTOR Cable connections 1 2 1 MICRO USB: Socket for mains power adapter. Connect the power adapter to power on the SPK-WFADAPTOR automatically. 2 LINE-Out: Audio output, 3.5mm stereo socket 3 SET (RESET/ WPS Mode): Press briefly to activate WPS mode; press and hold for about 5 sec. to restore the speaker to the factory settings. 3 4 5 4 Optical: Digital output. Using an optical cable for digital-audio connection.
QUICK USER MANUAL SPK-WFADAPTOR Option 1) Wi-Fi connection via WPS Mode If your router has a WPS button, this is a simple and convenient way of connecting the speaker to the network. Press the WPS button on the router and press the SET (WPS) button briefly on the rear of the SPK-WFADAPTOR to establish the connection. Note: Please also refer to the instruction for the router. The SPK-WFADAPTOR will now establish a connection with your network. The LED will flash rapidly during this process.
QUICK USER MANUAL SPK-WFADAPTOR Music playback You can play music from the network over your SPK-WFADAPTOR (and speaker) and you can also play music from your SPK-WFADAPTOR when connected via direct (cable) mode. Installing the App on an Android / Apple smartphone/ tablet PC In order to be able to use the music playback control function on the SPK-WFADAPTOR, you first need to install the AllPlay Jukebox App for your Tablet PC/ Smartphone.
QUICK USER MANUAL SPK-WFADAPTOR Resetting to factory settings Press and hold the SET button down for about 5 seconds in order to restore the factory settings. The SPK-WFADAPTOR will restart and the LED will flash white rapidly. Then the white LED will flash slowly to indicate that Wi-Fi mode is active and the SPK-WFADAPTOR is ready to connect to the network. NOTE: Please note that all the settings, e.g. the network WEP key, will be erased and will need to be input again after the product has been reset.
