User Manual

USER
MANUAL
NAVCAM
-
818SHD
12
WB (White Balance)
Auto /Incandescent /Sunny
/Cloudy /Fluorescent
Adjust lighting to your environment using
these pre-set settings
EV Bias
-
2.0/
-
1.7/
-
1.3/
-
1.0/
-
0.7/
-
0.3/0/0.3/0.7/1.0/1.3/1.7/2.0
/
Fill light according to different light source
intensity in different environment.
Language
English /Simplified Chinese
/Chinese /Russian
Select between various languages for the
LCD readout
Time Setup [Set the date and time]
Press UP/Down button to set properly,
press OK to save your setting and exit.
Beep Sound Setting On /Off Switch button sound ON or OFF
Auto Power Off
Setting
Off /1 Minute /3 Minutes /5
Minutes
If no buttons have been pressed and if
no
recording is taking place, the unit can be
shut off automatically after set periods of
time.
Backlight Off Setting On /Off
Turn the screen light on or off according to
your driving situation
Card Volume
[Display storage space
details]
Show the memory card remaining capacity
Format Yes /No
Format SD card (Note: Permanently erases
all data on card. Note: the unit cannot be
used until formatting is complete, which
usually takes about 20seconds depending
on the size of your card.)
Default Setting Yes /No
Reset all settings back to factory default
settings
Driver Time Warning Off /1 /2 /3 /4 Hours
Set a timer to remind you to take regular
breaks while driving
Map Direction North Up /Track Up Orientate the map view to suit you
Zoom Level 50 /100 /200 /400 Meters
Get a closer look at maps by for easier
reading
DN
(Day / Night)
Mode
Auto /Day /Night Mode
Adjust the screen backlighting for easier
viewing
Map Mode 2D /3D Increase the maps detail for easier viewing
Version
Info
[Display build info of
device]
Display the firmware version
number
Satellite info [Display Satellite info]
Check satellite status. 3 to 5 satellites are
required for a positive location fix