User Manual Glow in the Dark TWS Earbuds EPS-KTWSGO
Thank you for your purchase! Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
WHAT’S IN THE BOX • 2 x TWS Earbuds • Charging Case • Charging Cable • User Manual
SPECIFICATIONS Bluetooth Pairing Name: EPS-KTWSGO Bluetooth Version: 5.2 Bluetooth Range: 10 metres Earbuds Driver Size: 13mm Earbuds Battery: 25mAh Charging Case Battery: 230mAh Earbuds Runtime: 4 hours at 50% volume Case Recharges: 4 Earbuds Charge Time: 1.5 hours Case Charge Time: 2 hours Charging Port Type: USB-C Charging Input: 5V/1A (max) Earbuds Dimensions: 9 x 9 x 4mm Case Dimensions: 50 x 21.
PRODUCT DIAGRAM LED Turn LED Indicator On/Off Touch Control Area
LED INDICATOR Flashing Red = Case charging. Solid Red = Case fully charged. Solid Green = Earbuds charging. LED Off = Earbuds fully charged. GLOW IN THE DARK • The case and earbuds can glow in the dark when placed under a light source (such as a lamp) for 5 - 10 minutes. • The glow function can last up to 15 minutes. • Once the effect has diminished, please recharge the glow using a light source again.
PAIRING • Take the earbuds out of the charging case. • The earbuds will automatically turn on, sync together, and enter pairing mode. • Open the Bluetooth settings on your device (e.g. smartphone) then search for and select EPS-KTWSGO from the list. • If the earbuds don’t show up, refresh the Bluetooth list, or wait approx. 1-2 minutes.
DISCONNECTING • To remove the earbuds, go to the Bluetooth settings on your device, tap the earbuds and select “Remove” or “Forget”. • To remove the earbuds from a device you no longer have or can’t access, simply make sure you are at least 50 meters away from the old device then pair the earbuds to a new device.
RE-SYNCING THE EARBUDS • If the 2 earbuds are not synced together or enter a disconnected state during use please put both earbuds back into the case, close the case lid and leave for 1 minute. • The earbuds should now be re-synced to each other.
EARBUDS TOUCH CONTROLS • Previous Track Triple tap left earbuds. • Next Track Triple tap right earbuds. • Play/Pause Double tap either earbuds. • Answer Call Double tap either earbuds during incoming call. • End Call Double tap either earbuds during call. • Reject Call Press and hold either earbuds during incoming call. • Voice Assistance Press and hold either earbuds for approx. 2 seconds. Note: There are no volume controls built into the earbuds.
CHARGING Case: • Plug the included USB cable into a 5V/1A charging source. • The case will take 2 hours to charge fully. Earbuds: • Place the earbuds into the case. • Make sure the case has sufficient battery to recharge the earbuds. • The earbuds will take 1.5 hours to recharge. Note: When the earbuds battery is low, a prompt will be heard every 5 minutes to recharge.
TROUBLESHOOTING Why is sound only coming out of one earbud? • Make sure both earbuds have been charged and are synced together. • Follow the instructions outlined in this manual to re-sync your earbuds.
TROUBLESHOOTING Continued... Why are the earbuds not connecting to my device? • Pairing is done via Bluetooth. Make sure the device you are connected to has their Bluetooth function enabled. • Take both earbuds out of the charging case and place them next to the device they are being connected to. • Wait approx. 1-2 minutes for your device’s Bluetooth list to update then search for and select EPS-KTWSGO. • Make sure the earbuds have not already been paired to another device.
TROUBLESHOOTING Continued... Why is the sound skipping, pausing, or stuttering when playing audio? • The maximum wireless range from the earbuds to the connected device is 10 meters. If close to or exceeding this distance the sound signal may be affected. • When handling the earbuds (i.e., taking them in/out of ears) be mindful of accidentally pressing the multi-function button.
Visit our website www.laserco.com.au Check us out at www.youtube.
