Corp Computer Accessories User Manual

LaserSpeed 8000-3 Instruction Handbook
Installing the System
Part No. 93463 / Drawing No. 0921-01561 Page 30 of 221 Revision A (Sep 2007)
LS8000-3E/LS8000-3X Breakaway Cable Pinout
LaserSpeed breakaway cables have 39-pin military connectors on both ends
(male on one end and female on the other) and have pinouts identical to the
standard gauge cable.
39-Pin Male
39-Pin
Female
Description
1 1 RS232 Transmit (from LS8000-3 to host)
2 2 RS232 Receive (from host to LS8000-3)
3 3 Phase A True – High Speed Output (RS-422 Drivers)
4 4 Phase A False – User Scaleable (5-24V Output)
5 5 Phase A False – High Speed Output (RS-422 Drivers)
6 6 Phase B True – User Scaleable (5-24V Output)
7 7 Phase B True – High Speed Output (RS-422 Drivers)
8 8 Phase B False – User Scaleable (5-24V Output)
9 9 Phase B False – High Speed Output (RS-422 Drivers)
10 10 Material Present Input (5-24V Input)
11 11 Signal Ground for Inputs/Outputs/Serial
12 12 Power Ground for 24V Input
13 13 Power Ground for 24V Input
14 14 Measurement Direction Input (5-24V Input)
15 15 Phase A True – User Scaleable (5-24V Output)
16 16 Laser Interlock (Connect to Signal Ground to Turn On Laser)
17 17 Shutter Control (Connect to Signal Ground to Open Shutter)
18 18 Length Reset Input (5-24V Input)
19 19 Signal Ground for Inputs/Outputs/Serial
20 20
User V
IN
– Voltage input for Isolated Pulse Outputs (5 to 28V DC). The
voltage supplied will be the voltage level of the pulse outputs supplied by the
LS8000-3. If a Voltage is not supplied, the pulse outputs will be
approximately 4.5V.
22 22 Signal Ground for Inputs/Outputs/Serial
24 24 Index Pulse True - User Scaleable (5-24V Output)
25 25 Index Pulse False - User Scaleable (5-24V Output)
26 26 24V Fused Input
27 27 24V Fused Input
28 28 RS422 Transmit + (from LS8000-3 to host)
29 29 RS422 Transmit – (from LS8000-3 to host)
30 30 RS422 Receive + (from host to LS8000-3)
31 31 RS422 Receive – (from host to LS8000-3)
32 32 Analog Output Voltage
33 33 Analog Output Ground
34 34 Measurement Synchronization Input +
35 35 Measurement Synchronization Input -
36 36 Ethernet TX+
37 37 Ethernet RX+
38 38 Ethernet TX-
39 39 Ethernet RX-