Corp Computer Accessories User Manual

LaserSpeed 8000-3 Instruction Handbook
Ethernet Communication
Part No. 93463 / Drawing No. 0921-01561 Page 177 of 221 Revision A (Sep 2007)
Identifier Value Response Length (Bytes)
0 Blank 0 – These id's are ignored
1 IP Address 4
2 Ethernet Hardware ID 6
3 DHCP Enabled/Disabled 1 (either 1 or 0)
4 Gauge Model Varies (Text String)
5 Serial Number Varies (Text String)
6 Host Name Varies (Text String)
7 Boot Loader Revision Varies (Text String)
8 Software Revision Varies (Text String)
9 Firmware Revision Varies (Text String)
10 Web Server Revision Varies (Text String)
others Reserved
Discovery Beacon Response Format
 Protocol: UDP Broadcast
 Source Port: 10003
 Destination Port: Same as Discovery Beacon
The device response format is a UDP message to the same port from which
the discovery beacon originated. The response consists of a version string,
followed by a list of values in response to the list identifiers in the beacon
message. Each response consists of three parts: the identifier, the length of
the value (in bytes), and the value. This sequence is repeated for each value.
The last byte of the value is followed immediately by the next identifier.
Identifier bytes that are 0 are padding, and should be ignored.