Datasheet

LED STATUS INDICATION
The EL-USB-LITE features a bi-colour LED indicate logging and alarm status. To save power the status indicaon only operates when
the push buton is pressed for a short while.
Green single ash
The data logger is currently logging. No alarm.
Red single ash
The data logger is currently logging. Low alarm.
Red double ash
The data logger is currently logging. High alarm.
No LEDs ash
The data logger is stopped, the baery is empty or there is no baery ed.
www.lascarelectronics.com
Issue 15 05/2016 N.R Page 3 of 3
BATTERY INFORMATION
Replacement
We recommend that you replace the baery every month, or prior to logging crical data. The data logger does not lose its stored
readings when the baery is discharged or replaced; however, the data logging process will stop and will not resume unl the
baery is replaced and the logger restarted by EL-WIN-USB.
For maximum logging life, only use Maxell or Panasonic CR1620 Lithium baeries. Before replacing please remove the EL-USB-LITE
from the PC.
WARNING
Handle lithium metal baeries carefully, observe warnings on baery casing. Dispose of in accordance with local regulaons.
EL-USB-LITE
Low Cost USB Temperature Data Logger