Datasheet

EL-USB-2
Temperature, Humidity and Dew Point
Data Logger
www.lascarelectronics.com
Issue 14 08/2016 N.R Page 2 of 4
EL-WIN-USB
Lascar’s EasyLog control soware is available as a free download from www.easylogusb.com. Easy to install and use, the control
soware is compable with 32-bit and 64-bit versions of Windows 7, 8 & 10. The soware is used to set up the logger, download,
graph and annotate data or export in Excel, PDF and jpeg formats.
The soware allows the following parameters to be congured:
▪ Logger name
▪ Measurement parameter (°C or °F)
▪ Logging rate (user selectable between 10 seconds and 12 hours)
▪ High and low alarms
▪ Immediate and delayed logging start
Download the latest version of the soware free of charge from www.easylogusb.com
LED STATUS INDICATION
The EL-USB-2 features two green/red LEDs, one to represent temperature measurement and the other to represent humidity
measurement. Each is clearly marked on the logger. To save power, the status indicaon alternates between the two channels
every 10 seconds. First you will see the status of the temperature channel and 10 seconds later you will see the status of the RH
channel and so on.
10 seconds later
°C (°F)RH% RH% °C (°F)
In normal operaon the green LED will ash, but will change to red if an alarm condion has been triggered. Using EL-WIN-USB it
is possible to set the alarm to remain acve even if the reading has returned to normal, in which case the alarm LED will connue
to ash red. This ‘Hold’ feature in the soware ensures the user is noed that at some point an alarm level has been exceeded,
without needing to download the data.
Green double ash
The data logger is not currently logging, but is primed to start at a later date and me (delayed start)
Green single ash
The data logger is currently logging. No alarm on the channel
Red single ash
The data logger is currently logging. Low alarm on the channel
Red double ash
The data logger is currently logging. High alarm on the channel
Green triple ash
The data logger is full and has stopped logging. No alarm on the channel
Red triple ash
The data logger is full and has stopped logging. Alarm (high, low or both) on the channel
No LEDs ash
The data logger is stopped, the baery is empty or there is no baery
Dual Red ash (every 60 seconds)
The data logger baery is running low as it’s voltage has dropped below 2.9V