Datasheet

ManualsBrandsLASCAR ELECTRONICS ManualsEnvironmental Testing EquipmentVoltage Datalogger

Page1of1

FEATURES

ORDERING INFORMATION

Stock Number

Standard Data Logger EL-USB-3

(Data Logger, Measurement Leads,

Software on CD and Battery)

Replacement Battery BAT 3V6

LASCAR ELECTRONICS LTD.

MODULE HOUSE

WHITEPARISH

WILTSHIRE SP5 2SJ

TEL: +44 (1794) 884567

FAX: +44 (1794) 884616

E-mail: sales@lascar.co.uk

LASCAR ELECTRONICS (HK) LIMITED

FLAT C, 5/FL., LUCKY FTY. BLDG.

63-65 HUNG TO ROAD

KWUN TONG KOWLOON

HONG KONG

TEL: +852 2797 3219

FAX: +852 2343 6187

E-mail: b4lascar@samsongroup.com.hk

www.lascarelectronics.com

LASCAR ELECTRONICS INC.

3750 West 26th Street

Erie

PA 16506

USA

TEL: +1 (814) 835 0621

FAX: +1 (814) 838 8141

E-mail: us-sales@lascarelectronics.com

• 0-30V d.c. Measurement Range

• Logging Rates between 1s and 12hr

• Stores 32,510 readings

• Connection via two screw terminals

• USB Interface for Set-up and Data Download

• User-Programmable Alarm Thresholds

• Red and Green LED Status Indication

• Replaceable Internal Lithium Battery

EL-USB-3 Voltage USB Data Logger

Specifications liable to change without prior warning EL-USB-3 Issue 2 April/2005 M.C. Applies to EL-USB-3/1

This data logger measures and stores up to 32,510 voltage readings over a 0-30V d.c. measurement range. The user can easily set up

the logging rate and start time, and download the stored data by plugging the module straight into a PC's USB port and running the

purpose designed software under Windows 98, 2000 or XP. The data can then be graphed, printed and exported to other

applications. The data logger is supplied complete with a long-life lithium battery. Correct functioning of the unit is indicated by

flashing red and green LED. The data logger features a pair of screw terminals and is is supplied complete with a set of measurement

leads terminating in crocodile clips.

WINDOWS CONTROL SOFTWARE

Easy to install and use, the control software runs under

Windows 98, 2000 and XP (Home and Professional

Editions). It allows the user to set up and download any EL-

USB-3. The latest version of the control software may be

downloaded from .www.lascarelectronics.com

DATA LOGGER SET-UPS

• Logger Name

• Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)

• High and Low Alarms

• Start Date and Start Time

SPECIFICATIONS

Specification Min. Typ. Max. Unit

0-30V d.c. measurement range 0 30 V d.c.

Internal resolution 50 mV d.c.

Accuracy (overall error) 1 %

Logging rate every 1s every 12hr -

Operating temperature range -25 (-13) +80 (176) °C (°F)

1/2AA 3.6V Lithium Battery Life* 1 Year

* depending on ambient temperature, logging rate and use of alarm LED.

1of3

Summary of content (3 pages)

PAGE 1
EL-USB-3 Voltage USB Data Logger This data logger measures and stores up to 32,510 voltage readings over a 0-30V d.c. measurement range. The user can easily set up the logging rate and start time, and download the stored data by plugging the module straight into a PC's USB port and running the purpose designed software under Windows 98, 2000 or XP. The data can then be graphed, printed and exported to other applications. The data logger is supplied complete with a long-life lithium battery.
PAGE 2
EL-USB-3 Voltage USB Data Logger LED FLASHING MODES EL-USB-3 features a red and a green LED. The LEDs on an EL-USB-3 will flash in one of the following ways, assuming alarm latching is turned off (exact timings to be confirmed). - Green single flash, every 30 seconds Logger primed and ready to start.
PAGE 3
EL-USB-3 Voltage USB Data Logger CONNECTION BATTERY REPLACEMENT We recommend that you replace the battery every 12 months, or prior to logging critical data. The EL-USB-3 does not lose its stored readings when the battery is discharged or when the battery is replaced; the data logging process will however be stopped and cannot be re-started until the battery has been replaced and the logged data has been downloaded to PC. Only use 3.6V 1/2AA lithium batteries.