EL-USB Quick Start Guide
DOWNLOAD AND INSTALL SOFTWARE Windows™ 7/8/10 (32 & 64bit) Visit www.lascarelectronics.com/software and click ‘Download’. USING THE SOFTWARE . Insert the data logger into an available USB port on your PC. . Double click on the EasyLog USB icon on your Windows™ desktop. This will load the configuration software. Click ‘Set up and start the USB data logger’ and follow the set-up wizard. . When setup is complete, the data logger should be removed from the USB port.
REPLACING YOUR DATA LOGGER’S BATTERY Your data logger is provided with a 3.6V 1/2AA battery already installed. You can change the battery by following the instructions below. 1 EL-USB-1 PRO Before using the data logger you will need to insert the 3.6V 2/3AA High Temperature battery provided, following the instructions below. 1 2 3 4 2 EL-USB-1-RCG 3 4 The EL-USB-1-RCG’s battery is preinstalled. To charge the battery, connect to a USB port until the green LED shows.
OUR RANGE EL-USB Simple Low Cost Data Logging • USB interface for configuration and download • Easy to use Windows control software EL-MOTE EL-GFX EL-WiFi Cold Chain Logistics Loggers Advanced Data Logging Wireless Data Logging Cloud-based Data Logging • Low cost, reusable and waterproof • Graphic LCD for real-time readings and graph • Cloud based monitoring with email alerts • Comes with pre-configured alarms • Compact and robust design • Connects to an existing WiFi network • Cloud based m
For a full product datasheet for your data logger or for more information on the rest of the EasyLog range visit www.lascarelectronics.
IMPORTANT SAFETY INFORMATION Repairing or Modifying Never attempt to repair or modify Lascar products. Dismantling them, other than for the purpose of changing replaceable batteries, may cause damage that is not covered under the warranty. Servicing should only be provided by an authorized supplier. Disposal and Recycling Information You must dispose of Lascar products in accordance with relevant laws and regulations.
