Data Sheet

EL-USB-2-LCD
Temperature, Humidity and Dew Point
Data Logger with LCD Screen
www.lascarelectronics.com
Issue 11 08/2016 N.R Page 2 of 5
EL-WIN-USB
Lascar’s EasyLog control soware is available as a free download from www.easylogusb.com. Easy to install and use, the control
soware is compable with 32-bit and 64-bit versions of Windows 7, 8 & 10. The soware is used to set up the logger, download,
graph and annotate data or export in Excel, PDF and jpeg formats.
The soware allows the following parameters to be congured:
▪ Logger name
▪ Measurement parameter (°C or °F)
▪ Logging rate (user selectable between 10 seconds and 12 hours)
▪ High and low alarms
▪ Immediate and delayed logging start
Download the latest version of the soware free of charge from www.easylogusb.com
DISPLAY STATUS INDICATION
The EL-USB-2-LCD features a high contrast LCD which shows logged
temperature and humidity values using seven segment numbes,
along with annunciators. The LCD can also show informaon
regarding the loging status.
The LCD shows six dierent recorded readings, which can be cycled
through using the built-in push buon. The most recent logged
value, maximum logged value and minimum logged value can be
displayed separately for humidity and temperature.
Temperature
scale
Relave Humidity
symbol
Minimum logged
value symbol
Maximum logged
value symbol
Reading
Negave symbol
Display Logger Status Explanaon
Delayed Start
This is shown when the logger is set to start at a specic date and me. If the logger is set to ‘LCD o’ or
‘LCD on for 30 seconds’ mode, then this will only be shown aer the buon is pressed. Otherwise the
display will remain blank
Push to Start This is shown when the logger is setup for ‘Push to Start’ logging
Logging
This is shown when the logger is running in ‘LCD o’ mode, and the buon is pressed. The display clears
again aer three seconds
Stopped
If the logger has not been set to log and the buon is pressed, three dashes are displayed for three
seconds