Installation Instructions

PAGE 1
MORTISE LEVER LOCKET INSTALLATION INSTRUCTIONS 1] BEFORE INSTALLATION Please read these instructions thoroughly before attempting installation. ZI TOOLS NEEDED Phillips screwdriver, tape, pencil, power drill with 3/32”, 1/8", 3/8" and 9/16" drill bits. 202656XX Part Number:202560310 Fig G918 DRILLING INSTRUCTIONS Fig DUSTSHEET 1. Tape the template on the inside of the storm door as indicated on the template. Fold template along dosed line prior to taping.
PAGE 2
MORTISE LEVER LOCKET INSTALLATION INSTRUCTIONS LOCK INSTALLATION 1. Make sure nylon washer is installed. (FIG.5) Tum outside lever to correct direction and place cam/spindle assembly all the way into the spindles hole of outside assembly. 2. From the outside of the door, infers spindle through the square hole in the latch {F1G.6) and hold the outside assembly flush against ths outside door face.