Installation Instructions

NATURE VUE INSTALLATION INSTRUCTIONS PAGE 6
TROUBLESHOOTING GUIDE
RETRACTABLE SCREEN IS DIFFICULT TO PULL OR BOUNCES AS IT OPENS
AND CLOSES:
Check B-Side Guide Rails for screws that are not flush to the side housing.
A lopsided screw head could interfere with screen action.
Clean any debris from inside the B-Side Guide Rails.
Make sure A-Screen Cassette has a 90º cut. If not, trim to a straight cut.
A bouncing effect may indicate that the F-Bushing is not properly inserted
inside the Screen Tube.
Check if A-Pull Bar is rubbing against the B-Side Guide Rails.
Trim down accordingly.
Check to see that the H-Pull Bar End Cap is gliding freely.
THE RETRACTABLE SCREEN BINDS OR WILL NOT RETRACT INTO THE
CASSETTE HOUSING PROPERLY:
See above steps.
Make sure screen fabric is cut clean. A jagged cut will interfere with screen action.
Check to see if the housing or inner tube have been twisted, bent or otherwise
damaged during shipping.
SCREEN HAS BECOME TORN OR DAMAGED:
Replace the mesh using a Screen Refill Replacement Kit.
OPERATION OF THE SCREEN
The internal lock mechanism will automatically catch once the rollerscreen is fully
extended. To retract the screen, nudge the I-Pull Handle inwards slightly to release
the lock.
WARNING: Please use eye protection when cutting and installing your screen.
This is not a safety or security screen. This product will not stop a child or pet
from falling, provide security or protect your belongings.
RECORD YOUR PRODUCT REGISTRATION NUMBER HERE: ________________________________________________________________________________
? Installation Questions ? Missing Parts ? Replacement Parts ?
Please call our Homeowner Helpline @ 1-888-483-3768
DON’T GO BACK TO THE STORE!