Installation Guide
ESCAPE 200 INSTALLATION INSTRUCTIONS
RECESS INSTALLATION
SECURE THE RAILS WITH SCREWS
Secure the B-Bottom Guide Rail and C-Top Guide Rail with four M-#8 x
3/4”(19mm) Phillips Panhead Screws
in from each end and equally space the remaining screws.
When installing the Bottom and Top Guide Rail, use the convenient Pile
Opener included with this kit, to temporarily separate the two insect piles.
This will make for easier viewing and installation of the screws.
9
C
M
M
M
M
M
M
M
M
B
Pile Opener
F
E
optional • THRESHOLD TRANSITION
FOR RECESS MOUNT ONLY
Before screwing down the B-Bottom Guide Rail, you may choose to install
the E-Threshold Transition (with F-Threshold Transition End Caps) 9.4].
This part is optional; it protects the bottom guide rail and it is also a nice
aesthetic feature. The Transition may be installed toward the interior or
exterior of the home.
To install, cut the Transition
for Double Door Screens. Insert the F-Threshold Transition End Caps, slide
the lip of the Transition under the Bottom Guide Rail and secure both profiles
with four (4) M-#8 x 3/4”(19mm) Phillips Panhead Screws. Position screws
6 inches in from each end and center the middle one.
9.4
PROFILES OF BOTTOM GUIDE RAIL
AND THRESHOLD TRANSITION