Installation Guide

ESCAPE 200 INSTALLATION INSTRUCTIONS 
SURFACE INSTALLATION
INSTALLING THE CASSETTES
Remove and discard the P-Pile/Weather Strip from the back of A-Screen
Cassette. Slide two L-Surface Mount Clips into the groove on the rear
of both Screen Cassettes [5.1]. Position one of the A-Screen Cassettes, and use
M-#8 x 3/4”(19mm) Phillips Panhead Screws to secure L-Surface Mount Clips
to the opening [5.2]. The other A-Screen Casette will be installed in Step 8.
5
A
L
M
L
M
5.1 L-Clips for Surface Install
5.2 Surface Installation
CUT THE TOP AND BOTTOM RAILS

SUBTRACT 5”(127mm) FROM THE TOP GUIDE
SUBTRACT 4-3/8”(111mm) FROM THE BOTTOM GUIDE
Cut the rails to size.
6
CRIMP WEATHER STRIPS
Crimp in the upraised channel lip on the inside of each corner of the C-Top
Guide Rail and B-Bottom Guide Rail to keep the P-Pile/Weather Strip from
moving, as shown at left.
