Installation Instructions

7
Extend housings to the left and
right evenly until the flanges are
snug to the door trim/jamb.
Center sill plate assembly on the door sill.
Slide sill plate assembly extenders to each
side to fill gaps.
STEP 3
SECURE SCREEN
Insert a housing screw into the pre-
drilled screw hole at the top of screen
housing flange to hold frame in place.
Do not tighten completely.
Drive sill screws 4" from either end and
4" to the left and right of center.
Interior View
4" 4" 4" 4"
NOTE: For a tailored fit around door
moldings, notch each plastic
sill plate extender using a
utility knife. See page 8