Installation Instructions

6
Slide sill plate assembly onto bottom track.
STEP 2
INSERT SCREEN
Place screen assembly onto
door sill and lift into place.
Flush and short sill – Assembly rests
in a position where top of track is
flush with bottom edge of sill.
Long sill – Assembly rests in a position
on top of sill.
Insert the flat ends of the top and bottom
tracks into the decorative housing.
Sill Plate
Assembly
Bottom Track
Do not deploy screen until it is assembled to doorway.
When installing the screen assembly make
sure the housing flange is snug to the end/
edge of the door jamb.