Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
User Definable Strobe Patterns Superior LED Benefits
1. Quad Flash and Single Flash
2. Quad Flash
3. Double Flash (710ms)
4. Single Flash (710ms)
5. Double Flash and Single Flash
6. Five Consecutive Flash
7. Single Flash 1 and Single Flash 2
8. Single Flash (1000ms)
9. Single Flash (400ms)
10. Single Flash (200ms)
11. Single Flash (800ms)
12. Double Flash (400ms)
13. Slow Single Flash and Quick Single Flash (279ms)
14. Slow Single Flash and Quick Single Flash (1180ms)
The operator can chose one of 14 strobe patterns during installation.
Simply cycle through the options by temporarily connecting the white
lead to the positive lead. Once the desired strobe pattern is chosen, the
operator can then connect the white and red wire to the power source
and the specified pattern will hold.
1. Extreme long life..
2. High efficiency and low amp draw..
3. High durability and reliability..
4. Small size and light weight.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
Specifications / Additional Information
LEDSL-10W 10 Watt Strobing Beacon Quick Summary
Lamp Type: LED Light Emitting Diode Waterproof/ shock resistant
Dimensions: Width-2.5" Hieght-2" Depth-.5 " Multiple applications
Weight: -1 Lbs Black cast aluminum base
Amps: Less than 1/4 average amp draw Superior light signal
Voltage: 10-30 volt DC 10-30 volt DC
Beam Angle: 360 degrees 60mm in length X 50mm in width
Strobe Pattern: Variable, User Defined Red, Amber, Blue, White beacon colors
Available Colors: Red, Amber, White
Mounting: Two Hole Permanent Flush Mount
Wiring: 16 AWG wire (User Supplied) Special Orders- Requirements
Contact us for special requirements
Phone: [phone]
Toll Free: 1-800-369-6671