Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is
more light and longer LED life of 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels ranging from 9 to 42 VDC. These LEDLB series light bars can operate on current ranging from 9
to 42 VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile
and stand alone applications such as those found on boats, heavy equipment and vehicles where power systems don’t
always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-12-IR-M 35° Flood Beam
(Opt)
LEDLB-12-IR-M 10° Spot Beam
(Stnd)
Durability: The LEDLB series of LED light bars from Larson Electronics offer IP67 rated construction that is designed to
withstand tough environmental and operating conditions. These units can operate in temperatures ranging from -40
degrees Celsius to 85 degrees Celsius, are waterproof to one meter and resist ingress of dust, dirt and humidity. The
housings are formed from extruded aluminum, the hardware is stainless steel and the lenses are unbreakable
polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations, contributing to these units
15.6Grms rating of vibration tolerance. These LEDLB series light bars are ideal for use in marine environments as well as
industrial and commercial settings.
Mounting: The two 100lbs grip magnetic mounts on the LEDLB-12-IR-M allows for easy fixture placement and removal.
This mounting system includes a 16 ft coiled power cord with a cigarette plug connector which makes this unit ideal for
vehicle and equipment lighting applications where the unit can simply be attached or removed as needed. Please note, the
magnetic base on this unit increases the unit's overall height.
Note: Most Larson Electronics LEDLB, LEDLB-E, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a
Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating
connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple
function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.