Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions,
high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in
one temperature extreme and stored in another temperature extreme.
Mounting:Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum
housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an
integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the
aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the
mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle
placement of the light. In this LED emitter light bar model, an additional mounting option is provided. The adjustable, shock insulated mounts are
attached to a simple, inverted u-bracket type mount. The LED light bar can then be mounted via a single 3/8 bolt through the center of the
bracket. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch