Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Remote Operation: Remote control functions include on/off, and 4 buttons which control up, down, left and right movement. The light will
continue movement as long as the buttons are pressed. Releasing the buttons stops movement and holds the Golight in position. A fast and slow
mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are depressed. Holding the button for 12 seconds
in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and is
approximately 35 seconds for full rotation and 20 seconds for one full range of tilt. The hand held remotes are 3 inches long by 2 inches wide by
3/8 inch thick. The dash mount remotes are 4 inches long by 2.5 inches wide by 1/2 inch thick.
Durability: The GL-3049 Golight Stryker is designed for hunting and demanding outdoor use with a weather resistant housing constructed of
high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and abusive
conditions. This particular Golight Stryker has a black finish, making it ideal for docks and buildings where an attractive appearance is desired.
Remote movement of this spotlight is provided by an automotive grade internal motor, gear, and transmission assembly that is constructed of
LEXAN, brass, and stainless steel to provide rust and corrosion resistance as well as long life and reliable operation.
Mounting: The light is permanently mounted via three screws. A detachable, interlocking stainless steel mounting plate simplifies mounting.
Three mounting holes secure the plate to the surface. Interlocking brackets and a machine screw at the back of the unit secures the plate to the
Golight.
Power: This light operates with 12 volts DC and draws 5.5 amps, making it ideal for vehicles, boats, ATVs, and similar sources of 12 volt direct
current. On this particular model, the light ends in a 1 foot pigtail with stripped and tinned leads. The operator must provide wiring from the
battery and/or fuse box to the light. 16 AWG is recommended.
Light Output: The lamp in this Golight Stryker is a 65 watt Halogen Cr5 Pentabeam II bulb which produces 1,300 lumens. This bulb is paired
with a tight focus spot beam optics to produce a spot beam 850 feet in length. This lamp has a 6000K color temperature, giving it very good color
rendering and contrasting properties and the ability to clearly and sharply illuminate objects at long distances. This beam is effective to the far
end of its reach, producing enough illumination to read a book at 850 feet.
This high power Golight Stryker is ideal for hunting, security, boating, law enforcement, emergency services, utilities, and anywhere high power
and remote control functionality are desired.
Click here to see the Golight Model Comparison Chart
GOLIGHT SPOTLIGHT APPLICATIONS:
Golight Stryker Features