Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Remote Operation: Remote control functions include on/off, and 4 buttons which control up, down, left and right
movement. The light will continue movement as long as the buttons are depressed. Releasing the buttons stops movement
and holds the Golight in position. A fast and slow mode button (turtle/hare) controls the speed of the motor while the pan
and tilt function buttons are depressed. Holding the button for 12 seconds in fast mode results in a full 370 degree rotation,
and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and is approximately 35 seconds for full
rotation and 20 seconds for one full range of tilt.
Durability: The GL-3000H-SE50-M Golight Stryker is designed for boating, industrial applications, and demanding outdoor
use with a weather resistant housing constructed of high quality ASA Luran thermoplastic that is heat resistant, impact
resistant, UV resistant and able to withstand rugged use and abusive conditions. This particular Golight Stryker has a
durable white finish, making it ideal for boats and vehicles where an attractive appearance is desired. Also available are
chrome, camouflage, and black finishes. Remote movement of this spotlight is provided by an automotive grade internal
motor, gear, and transmission assembly that is constructed of LEXAN, brass, and stainless steel to provide rust and
corrosion resistance as well as long life and reliable operation.
Magnetic Mounting: This light mounts using our magnetic mounting system consisting of a magnetic base encapsulated in
soft rubber which prevents scratching of vehicle finishes and allows it to adapt to uneven vehicle surfaces for a secure grip.
The magnetic base is water tight, sealed against intrusion from dust and dirt, and has 100 pounds of gripping force. This
base has been tested to 60 mph to ensure effective stability at highway speeds and includes a rubber cord grip for secure
power connections.
Power: This Golight is connected to power through a detachable 16 foot, 16 AWG zip cord terminated with a cigarette plug.
This cord can be attached and detached from from the light via a 2 pin molded, weatherproof connector that connects the
cord to the Golight’s integral 1 foot pigtail wire. This cord and magnetic mounting system allows easy setup of the light on
vehicles and equipment. Operators can simply detach the light from the vehicle, unplug the cord, and switch the light to
another vehicle in a matter of minutes, or simply stow the light for extended storage or to prevent theft. This light operates
with 12 volts DC and draws 3 amps after an initial 7.2 amps - 60 second startup amp draw, making it ideal for vehicles,
boats, ATVs, and similar sources of 12 volt direct current.