Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Part #: EPS-3P-30A-SPST (144659)
The Larson Electronics EPS-3P-30A-SPST Explosion Proof Three Pole Starter Switch is listed Class I Division 1 & 2 and Class II
Division 1 & 2 and provides a safe and secure method for operators to use with contactors and magnetic starters to provide circuit
selection and control for motors and equipment in hazardous locations. This 3-phase maintained starter switch is rated for a maximum
of 30 amps at 250V and 20 amps at 600V, is constructed of a stainless steel body, and carries a NEMA 4X rating.
This explosion proof starter switch is ideal for operators seeking a high quality explosion proof starter switch rated for use in hazardous areas
designated Class I Division 1 and Class II Division 1. This explosion proof switch is rated at 30 amps at 250V and 20 amps at 600V. The entire
unit is constructed of stainless steel. This unit is easily wall mounted via integral mounting tabs at two corners of the housing and provides a 1/2"
or 3/4" hub openings located on the sides of the housing for running electrical conductors in a feed through configuration. A bushing seal at each
conductor opening prevents damage to wiring insulation.
This unit is rated to handle electrical loads of 250-600V AC up to 30 amps and is suitable for use in environments where flammable gases and
vapors or combustible dusts and particulates may be present. The EPS-3P-30A-SPST is non-factory sealed.
The EPS-3P-30A-SPST explosion proof starter switch cover and housing box is constructed of stainless steel with all arcing devices contained
within an explosion proof labyrinth switch for the highest protection possible. This design does not require external sealing fittings. Two external
mounting lugs provide simple and secure mounting of the unit to walls and flat surfaces. The unit box, switch, and face plate are all included with
the product.
A 1/2" or 3/4" NPT tapped conduit opening is provided on the top of the unit, providing easy and secure connection to main power line supplies.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Lighting, Wet areas or Locations Where Combustible Dust is Present.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial
grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A
commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973.
Contact us today at 800-369-6671 or message [e-mail] for more information about our custom options tailored to meet your
specific industry needs.
Specifications / Additional Information
EPS-3P-30A-SPST Explosion Proof Three Phase Starter Switch Certifications - Compliance
Switch Voltage Rating: 250-600V AC Class I, Divisions 1 & 2, Groups B, C, D
Switch Current Rating: 30 Amps @ 250V AC and 20 Amps @ 600V
AC
Class I, Zones 1 & 2, Groups IIB, IIA
Grounding: Single Internal Housing Ground Screw Class II, Divisions 1 & 2, Groups E, F, G
Configuration:Front Switch Class III
Hub: 1/2" or 3/4" NPT NEMA 7(C,D) 9(E,F,G)
Unit Materials: Box/Receptacle - Stainless Steel
Insulation: Integral Bushings in Conductor Openings Special Orders- Requirements
Mounting: External Mounting Lugs on Body Contact us for special requirements
Switch Type:Three Pole SPST Toll Free:1-800-369-6671
Fax: [phone]
E-mail: [e-mail]
Scroll Down to Purchase-