Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Waterproof Transformer Converts 120V/280V AC to 24 Volts DC - Maximum Capcity up to 6.25 Amps
Part #: DCP-6-24V-DP
The Larson Electronics DCP-6-24V-DP Waterproof Power Supply converts commonly used 120 - 280VAC electrical current to 24VDC
@6.25 Amps. This converter includes a typical straight blade plug on the input end and a 2 prong Deutsch connector on the output
end. This converter can operate with voltages within the 100-277VAC range and converts it to 24VDC, allowing users to use standard
AC power to operate equipment like our LED light bars and HID Golights that require 24 Volts DC.
This 120 watt converter comes with a straight blade plug on the input lead and a two pin Deutsch connector on the output lead, allowing users to
simply plug the unit into a typical wall outlet, then connect any of our 24 volt lights equipped with Deutsch connectors. Most of our multi-voltage
LED lights and LEDLB, LEDLB-E, LEDP series lights as well as many of our 24 volt HID units utilize Deutsch connectors, making this unit "plug-n
-play" compatible. If you purchase this transformer with any of our Larson Electronics lights, we will make sure that the connectors are a match.
The small size and wide input voltage range of this unit make it ideal for operating Larson Electronics LED light bars, Halogen Golights and other
equipment that requires 24VDC current indoors or outdoors and anywhere 24 volt DC power is not readily available. THIS WILL NOT WORK
WITH THE HID GOLIGHT SPOTLIGHTS (GL-3XXXH-X models) Measuring 8.7 inches long by 2.5 inches wide by 1.5 inches deep, this unit
weighs less than one pound and is mounted with two conventional screws via slots that allow removal and repositioning simply by loosening the
screws.
Features: The DCP-6-24V-DP 120 watt converter features full range, universal AC input capability and can be operated with 100 to 277VAC.
The unit converts this AC power input to 120 watt, 6.25 Amp 24VDC output. IP67 rated, this unit is waterproof and suitable for indoor or outdoor
applications. Integrally designed protection includes overload, short circuit, over temperature and over voltage safeguards to prevent overheating
and unit damage in case of faults or overly heavy current draw. This unit will limit current when an over current condition is encountered and
recovers when the condition is removed. This unit will enter hiccup mode under short circuit conditions and recover when the fault is removed.
The unit will also shut down when an over temperature condition occurs and recovers automatically when the temperature returns to normal
levels.
This power converter has a -30 / +70C operating temperature range and is UL UL1012 and UL60950-1 compliant as well as compliant with
worldwide safety regulations for lighting. This unit has a 92% conversion efficiency and is suitable for use with moving LED signs and similar LED
equipment. These units also feature Power Factor Correction, adjustable output current range from 3.15~ 6.3A either through the output cable or
internal potential meter and have an input frequency range of 47 ~ 63Hz.
NOTE: In order to obtain the best performance and the longest operational life from these units, it is recommended that you do not exceed 75%
of the unit’s output amperage. To determine if this converter suits your desired application, add together the total wattage of the equipment you
intend to use with this unit and divide this total by 24 volts to find the total amperage draw that will be placed upon the converter. For example, if
you are using our LEDP10W-60E 60 watt LED light, 60 watts divided by 24 volts is 2.5 amps. This would mean the DCP-6-24V-DP is well suited
as it would run at just under 50% capacity to produce the necessary 2.5 amps. Running these units at 100% of their capacity can create excess
heat and lead to shortened converter life.