Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Part #: DCP-25-4XDP (64313)
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
Features: The DCP-25-4XDP 256 watt converter features full range, universal AC input capability and can be operated with 100 to 277VAC. The
unit converts this AC power input to 256 watt, 25 Amp 12VDC or 12.5 Amp 24VDC output. IP67 rated, this unit is waterproof, wet and damp area
approved and suitable for indoor or outdoor applications. Integrally designed protection includes overload, short circuit, over temperature and
over voltage safeguards to prevent overheating and unit damage in case of faults or overly heavy current draw. This unit will limit current when
an over current condition is encountered and recovers when the condition is removed. This unit will enter hiccup mode under short circuit
conditions and recover when the fault is removed. The unit will also shut down when an over temperature condition occurs and recovers
automatically when the temperature returns to normal levels.
This power converter has a -30 / +60C operating temperature range and is UL UL1012 and UL60950-1 compliant as well as compliant with
worldwide safety regulations for lighting. This unit has a 90% conversion efficiency and is suitable for use with moving LED signs and similar LED
equipment. These units also feature Power Factor Correction, adjustable output current range from 8~ 16A either through the output cable or
internal potential meter and have an input frequency range of 47 ~ 63Hz.
NOTE: In order to obtain the best performance and the longest operational life from these units, it is recommended that you do not exceed 75%
of the unit’s output amperage. To determine if this converter suits your desired application, add together the total wattage of the equipment you
intend to use with this unit and divide this total by 12 volts to find the total amperage draw that will be placed upon the converter. For example, if
you are using four of our LEDP10W-60E 60 watt LED lights, 240 watts divided by 12 volts is 20 amps. This would mean the DCP-25-4XDP is
well suited as it would run at 75% capacity to produce the necessary 20 amps. Running these units at 100% of their capacity can create excess
heat and lead to shortened converter life.
Specifications / Additional Information
DCP-25-4XDP Power Converter DCP-16-12V-DP Features
Line In Voltage: 100-277VAC @47~63 hz IP67 Rated Waterproof
Line Out: 12VDC @ 25 Amps, 24VDC @ 12.5 Amps Overload, Short Circuit ,Over Voltage, Over Temperature Protection
Watts: (4) 64 - 256 Total UL1012 Compliant
AC Input Connector: 1' Pigtail, Straight Blade Plug UL60950-1 Compliant
DC Output Connector: 1' Pigtail, (4) 2 Pin Deutsch Connectors International Lighting Safety Standards Compliant
Protection: Short Circuit/Overload/ Over Voltage/Over Temperature Suitable For LED Moving Signs
Mounting: Two Screw Slide Notches Suitable For Wet or Damp Locations
Operating Temp: -30 / +60C
Efficiency: 90% Special Orders- Requirements
Dimensions: 9.6"-L 2.5"-W 1.5"-D Contact us for special requirements
Weight: 1 Lbs Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [e-mail]
Scroll Down to Purchase