Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Part #: DCP-11-2XDP (46958)
The DCP-11-2XDP 106 watt converter features full range, universal AC input capability and can be operated with 100 to 277VAC. The unit
converts this AC power input to a single 106 watt light or two 53 watt lights at 11 amps with 12VDC output or 6.25 amps with 24VDC output. IP67
rated, this unit is waterproof and suitable for indoor or outdoor applications. Integrally designed protection includes overload, short circuit and
over voltage safeguards to prevent overheating and unit damage in case of faults or overly heavy current draw. This unit will shut down when an
over current or over voltage condition is encountered and recovers when manually turned back on.
This power converter has a -30 / +70C operating temperature range and is UL UL1012 and UL60950-1 compliant as well as compliant with
worldwide safety regulations for lighting. This unit has a 92% conversion efficiency and is suitable for use with moving LED signs and similar LED
equipment.
NOTE: In order to obtain the best performance and the longest operational life from these units, it is recommended that you do not exceed 75%
of the unit’s output amperage. To determine if this converter suits your desired application, add together the total wattage of the equipment you
intend to use with this unit and divide this total by 12 volts to find the total amperage draw that will be placed upon the converter. For example, if
you are using our LEDP10W-60E 60 watt LED light, 60 watts divided by 12 volts is 5 amps. This would mean the DCP-11-2XDP is well suited as
it would run at slightly less than 50% capacity to produce the necessary 5 amps. Running these units at 100% of their capacity can create excess
heat and lead to shortened converter life.
Specifications / Additional Information
DCP-11-2XDP Power Converter DCP-11-2XDP Features
Line In Voltage: 100-277VAC @47~63 hz IP67 Rated Waterproof
Line Out: 12VDC @ 11 Amps, 24VDC @ 6.25 Amps Overload,Short Circuit,Over Voltage Protection
Watts: (2) 53 - 106 Total UL1012 Compliant
AC Input Connector: 1' Pigtail, Straight Blade Plug UL60950-1 Compliant
DC Output Connector: 1' Pigtail, Two 2 Pin Deutsch Connectors International Lighting Safety Standards Compliant
Protection: Short Circuit/Overload/ Over Voltage Output Wire Ending in 2 Deutsch Plugs
Mounting: Two Screw Slide Notches Suitable For LED Moving Signs
Operating Temp: -30 / +70C
Efficiency: 92% Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [e-mail]
Scroll Down to Purchase