Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
The LEDWP-600E-DLC-4000K consists of forty-five LEDs housed within a waterproof aluminum housing that is powder
coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat
dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which
is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power
connection point and rounds out this unit's weather resistant construction. An optional glare shield it shipped with this light.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Mounting hardware for the LEDWP-600E-DLC-4000K consists of a stainless steel coated bracket and stainless steel screws to provide secure
mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to
position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 Hz, providing
versatile power connection options. The LEDWP-600E-DLC-4000K provides an efficient and highly durable alternative to standard quartz and
and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power.
Warehouse
illuminated by the
LEDWP-600E-DLC-4000K
LEDWP-600E-
DLC-4000K mounted 15' high illuminating a 30' long by 50' wide
parking area.
Click Photo to Enlarge Click Photo to Enlarge
With the LEDWP-600E-DLC-4000K there is no warm up period, the light can be cycled on and off without any reduction in
lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of
operation. The LEDWP-600E-DLC-4000K is ideal for wall pack lighting, wall pack down lighting, upwards lighting,
monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples.