Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Post mount spotlight - 6 inch - LED - Passenger side WITH install kit
Post mount spotlight - 6 inch - LED - Passenger side WITH install kit
Operation: Operator controls rotation and elevation of spotlight outside of vehicle by twisting and turning a handle on the inside of the
vehicle. Operator remains protected from the elements and can position the beam quickly and easily. The beam remains where the
operator places it until the handle is moved.
Format: 6 inch round ABS housing (no rusting). Chrome models are ABS plastic with a chrome dip
Colors: Available in Chrome and Black Housing (shaft is chrome and handle is black)
Shaft: Stainless steel with triple plate chrome coating
Handle: Black rubberized handle
Switch: Thumb activated toggle on the top rear of the handle
Voltage: Available in 12 Volt, 30 watt
Lens Type: Clear polycarbonate
Beam Type: Spot beam
Beam Length: 600 feet projection
Bulb Type: 30 watt LED
Candlepower: Industrial candlepower: 215,000
Electrical: Single positive lead from handle connects to vehicle power. Spotlight grounded via mounting kit to vehicle chassis
Amp draw: 2.5 amps on 12 volts
More Information: More information on Post Mount Spotlight - 6 inch with 100 Watt Bulb
Mounting options include (depends on year, make and model of vehicle, see product description for specific mounting location):
Post mount spotlights are the most common installation options, with the mounting going through the A-pillar running alongside the
windshield. The A-pillar is the metal frame on the side of the windshield.
Inside post mount spotlights are common in late model vehicles, but the installation requires more time as one must drill through the A-
pillar and cut a small notch in the forward window support of the door. Both inside post mount lights and post mount lights are mounted in