Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Replacement 1000 Watt Metal Halide Light Head - No Ballast
Part #: HID-22SL-REM-105
Made in the USA
The HID-22-SL-REM-105 from Larson Electronics is a replacement 1000 Watt Metal Halide Light Head with no ballast and provides
operators with the intensity and exceptional color rendering of a metal halide lamp in a unit that is safe for ground mounting and use
in wet areas. The unit comes standard with a remote ballast, this means that the HID unit can be mounted at a different location than
it's ballast.
The HID-22-SL-REM-105 1000 watt metal halide light produces exceptional illumination using a 19” aluminum reflector housing that spreads a
powerful flood pattern of high quality light over large areas. This fixture is equipped with a 1000 watt metal halide lamp which produces the
intense illumination and exceptional color rendering normally associated with these lamps. The metal halide lamp is secured within a separate
die cast housing for strength and durability while a clear tempered glass lens provides protection for the lamp. The unit is the light head only, no
remote ballast included. This fixture is U.L. listed for wet area certification and the high power flood beam produced by this lamp makes it ideal
for applications requiring illumination of large scale areas that may be subject to wet conditions.
The 19” reflector on this lamp is constructed of aluminum with a clear tempered glass lens which is hinged onto the reflector and secured into
place with a four point latching system. The lamp socket is die cast aluminum and separate from the reflector for added durability. The reflector
and lamp socket assembly are secured together as one unit which makes installation simple and straightforward. Vertical and horizontal aiming
guides are included in this lamps design which makes aiming this lamp during operation easier and safer, protecting users from the potential
burns associated with handling operating metal halide lamp fixtures. A stainless steel hinge provides durable adjustability and corrosion
resistance. This lamp comes prewired with a six foot cord and is U.L. rated for wet areas and ground mounting.
Suggested Applications: Include but not limited to Stadiums, Speedways, Storage Areas, Public Parks and Mobile Lighting.