Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
The HL-LED3M-WPG is a C4 LED technology handheld spotlight that emits 210 lumens on high output and 20 lumens on low output.
The multi-function battery powered LED pistol grip spotlight offers a powerful, bright, white beam that can switch from high, to low, to
strobe modes by simply adjusting the switch located on the side of the handle. In high mode, the unit has a runtime of 8.5 hours, in
low and strobe mode, the unit has a runtime of 120 hours.
The unit is powered by either a 12 volt source plug in cigarette adapter or by 4 'C' alkaline batteries. The 12V plug in allows for illumination
without wasting any of the battery life. Whereas the batteries allow the operator to disconnect the unit from the 12V source whenever needed,
while still producing the same output from the spotlight.
The housing is made of high impact polycarbonate with a rubberized lens ring. The unit weighs approximately 1.6 pounds and at its tallest point,
measures 6.75 inches. The housing is water resistant and can be used outdoors while holding up against strong elements such as snow, rain
and sand storms.
This LED spotlight includes an integrated base and stand for hands-free applications. Operator must pull the tab/base away from the light
housing to utilize the base stand. Simply lay the LED spotlight on it's base and the shape of the spotlight allows it to hold it's place while the base
stand is active.
This first image shows a 53' container with no illumination, completely sealed.
This image shows the LED3M-WPG in spot mode with it's beam focused on the back end of the container.