Specification Sheet

Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
constructed of high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and
abusive conditions. This particular Golight Stryker has a durable black finish, making it ideal for docks and buildings where an attractive
appearance is desired. Remote movement of this spotlight is provided by an automotive grade internal motor, gear, and transmission assembly
that is constructed of LEXAN, brass, and stainless steel to provide rust and corrosion resistance as well as long life and reliable operation.
Mounting: The light is magnetically mounted. The magnet is water tight and has a 100 pound grip base and is tested to 60 mph. The magnetic
base is encapsulated in soft rubber to adapt to uneven vehicle surfaces and prevent scratches on vehicle paint. A wrap around base seal
prevents dirt from entering the base of the light.
Power: This light operates with 12 volts DC and draws 3 amps, making it ideal for vehicles, boats, ATVs, and similar sources of 12 volt direct
current. It is equipped with a 16 foot, outdoor rated cord with a cigarette plug. Weather tight connector enables operators to disconnect cord at
12 inches from the light for storage or vehicle portability.
This photo shows a large field at a park with no illumination
besides the distant street lights.
This photo shows the LED Golight Stryker being used to
spotlight the distant trees. Location is approx. 800' feet from the
light.
Light Output: The lamp in this Golight Stryker is a 36 watt LED bulb which produces 2,520 lumens. This bulb is paired with a tight focus spot
beam optics to produce a spot beam 900 feet in length. This lamp has a 6000K color temperature, giving it very good color rendering and
contrasting properties and the ability to clearly and sharply illuminate objects at long distances. This beam is effective to the far end of its reach,
producing enough illumination to read a book at 900 feet.
New Flood Design: With a new flood design, the operator can remove the flood lens for a narrower spotlight beam reaching 900 feet in
distance. Four tabs lock the flood lens into place to create a beam 150 feet long by 125 feet wide. The operator can push back on the locking
tabs to remove the diffuser lens, revealing a narrower, directed beam that reaches to 900 feet in distance.
This high power LED Golight Stryker is ideal for hunting, security, boating, law enforcement, emergency services, utilities,
and anywhere high power and remote control functionality are desired. This unit produces a more powerful and far
reaching beam than halogen spotlights and uses less power on a 12 volt system, making it well suited to vehicles and
boats where power supply is limited.
Golight Stryker Features Superior LED Benefits