Specification Sheet
Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Explosion Proof On/Off Switch - Class I, Div. 1 & 2 - Class II, Div. 1 & 2 - 20 Amp Rated
Part #: EPS-25A
The Larson Electronics EPS-25A Explosion Proof Feed Through Tumbler Switch is UL approved Class 1 Division 1 & 2 and Class 2
Division 1 & 2 and provides a safe and secure method for operators to interrupt power before connecting and disconnecting portable
or stationary electrical devices and equipment in hazardous locations.
This explosion proof tumbler switch is ideal for operators seeking a high quality explosion proof switch rated for use in hazardous areas
designated Class 1 Division 1 and Class 2 Division 1. This explosion proof switch is rated at 20 amps-120-277 Vac and 1 HP at 120 Vac and 2
HP at 240 Vac. The entire unit is constructed of malleable iron and contains an internal sealing chamber constructed of copper free aluminum.
This unit is easily wall mounted via integral mounting tabs at two corners of the housing and provides two 1/2" hub openings located on the top
and the bottom of the housing for running electrical conductors in a feed through configuration. A bushing seal at each conductor opening
prevents damage to wiring insulation.
This unit is rated to handle electrical loads of 120-277 VAC up to 20 amps and is suitable for use in environments where combustible dusts and
particulates may be present.