Installation Manual

Larson Electronics LLC www.LarsonElectronics.com [e-mail]
9419 E US HWY 175, Kemp, TX 75143 - P: [phone] - F: [phone]
4. To remove plug, push plug inward and turn to counterclockwise limit (45°). Pull plug straight
out.
MAINTENANCE
These plugs require no maintenance other than periodic cleaning and a check for damage and/or loose
fasteners. Also, check cord for damage and/or wear. This should be performed on a regular basis,
determined by the environment and usage.
WARNING: Disconnect and Lock Out supply circuit before starting maintenance work.
1. To clean plug, it is recommended that a soft, nonmetallic bristle brush be used.
2. Check tightness of all accessible screws.
3. Inspect the entire assembly (including cord) for damage and/or wear. Contact Larson Electronics
for availability of replacement parts and discontinue use of the equipment until repairs are
made.