Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
The LEDWP-600E consists of six LEDs housed within a waterproof aluminum housing that is powder coated for added
durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and
increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to
the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and
rounds out this unit's weather resistant construction. An optional glare shield it shipped with this light.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Mounting hardware for the LEDWP-600E consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting and
resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as
desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 Hz or 11-25V AC/DC, providing
versatile power connection options. The LEDWP-600E provides an efficient and highly durable alternative to standard quartz and and halogen
wall pack lights that produces a longer reaching beam while using only a fraction of the power.
Warehouse
illuminated by the
LEDWP-600E
LEDWP-600E
mounted 15' high illuminating a 30' long by 50' wide parking area.
Click Photo to Enlarge Click Photo to Enlarge
With the LEDWP-600E there is no warm up period, the light can be cycled on and off without any reduction in lamp life,
there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The
LEDWP-600E is ideal for wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks,
warehouses, billboards, parking lots, and security systems just to name a few examples.