Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Remote Operation:
Hand Held Remote: Remote control functions include on/off, and 4 buttons which control up, down, left and right movement. The light will
continue movement as long as the buttons are pressed. Releasing the buttons stops movement and holds the Golight in position. A fast and slow
mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are depressed. Holding the button for 12 seconds
in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and is
approximately 35 seconds for full rotation and 20 seconds for one full range of tilt. Remotes are 3 inches long by 2 inches wide by 3/8 inch thick.
Dash Mount Remote: This particular model also includes a wireless dash mount remote. This remote control is considered dash mounted
because once the rubber cover is removed, the unit can be attached to any mounting surface by fastening 4 screws through the holes shown
below. The rubber cover is replaced, providing weather resistant protection to the internal electronics. Operators can also attach velcro to the
back side of the remote, allowing the dash mount remote to be quickly removed and work as a handheld remote. The remote features dual speed
control of the motorized rotation and tilt. This is an ideal feature for remote operation conditions where the operator cannot see the angle of the
beam from the driver's seat.This dash mounted remote control features an on/off button, a fast/slow selector and 4 directional buttons. The
motorized remote control spotlight will move in a direction as long as the button is depressed. Once released, the remote control spotlight will
hold that position. These dash mount wireless remotes measure 4.38 inches long by 2.65 inches wide by 1/2 inch thick.
Durability: The GL-9007 Golight Radioray is designed for hunting and demanding outdoor use with a weather resistant housing constructed of
high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and abusive
conditions. This particular Golight is white in color, making it ideal for docks and buildings where an attractive appearance is desired. Remote
movement of this spotlight is provided by an automotive grade internal motor, gear, and transmission assembly that is constructed of lexan,
brass, and stainless steel to provide rust and corrosion resistance as well as long life and reliable operation.
Mounting: The light is permanently mounted to a flat surface with four screws. The screws are included.
Power: This light operates with 12 volts DC and draws 3 amps, making it ideal for vehicles, boats, ATVs, and similar sources of 12 volt direct
current. On this particular model, the light ends in a 1 foot pigtail. Operator must provide wiring from the Golight to the power supply. 16 AWG is
recommended.
This photo shows a large field at a park with no illumination, save
the distant street lights behind.
This unit shows the LED Golight being used to spot light the
distant trees, located approx. 800' from the unit.
Light Output: The light source in this Golight Radioray is provided by six, six watt LEDs that produce 2,500 lumen of light output. This lamp has
a 6000K color temperature, giving it very good color rendering and contrasting properties and the ability to clearly and sharply illuminate objects
at long distances. This beam is effective to the far end of its reach, producing enough illumination to read a book at 900 feet.
This high power Golight Radioray is ideal for hunting, security, boating, law enforcement, emergency services, utilities, and anywhere high power
and remote control functionality are desired.
Golight Radioray Features Superior LED Benefits