Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Part #: LED-A19-5W-E26 (68684)
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This lamp has an acceptable operating temperature range of -20°C to +85°C and an operational life of 50,000 hours. The solid state design of
this lamp means it is resistant to the effects of impacts and vibrations, providing adding durability to withstand conditions that would cause a
normal incandescent bulb to fail. The overall dimensions of the LED light are the same as a standard A19 incandescent lamp, and the base is
constructed of aluminum for durability and resistance to rust and corrosion.
The LED-A19-5W-E26 is the ideal upgrade and/or replacement for hand lamps and drop lights like our EPL-120 series explosion proof hand
lamps. This bulb produces nearly 2 times the foot candles at 5' than of a standard 60 watt rough service bulb. This LED lamp is offered in warm
white 2700K, neutral white 4000K, and cool white 5600K color temperatures. The high output and color options, this bulb is ideal for improving
the light output of hand lamps, drop lights, and other standard incandescent lighting within industrial applications.
The E26/E27 base is the same screw in base that the standard light bulb in the US and Europe. You can use this LED light bulb in a standard
lamp in your home. However, given the durability and longevity, we also see this LED light bulb as an ideal solution for sealed hand lamps and
drop lights that usually involve replace seals, gaskets, etc. when re-lamping. As such, this LED light bulb can provide additional safety measures
and time savings, given the low heat production and that it does not require replacing for 50,000 hours. Since the LED bulb uses solid state
technology, the vibration (dropping, etc.) that degrades conventional incandescent bulbs is not an issue with these LED bulbs.
Specifications / Additional Information
LED-A19-5W-E26 5 Watt LED Bulb Features
Lamp Type: LED ETL Listed
Watts: 5 50,000 Hour Life Rating
Lumens: 600 Direct Replacement for 60W Lamps
Dimensions: 60mm-OD, 114mm-H
Voltage: 100-277 VAC 50/60hz Special Orders- Requirements
Color: White Contact us for special requirements
CRI: 75-80 Toll Free: 1-800-369-6671
Operating Temp: -20C to 85C Intl: 1-903-498-3363
Materials: Aluminum Housing - Polycarbonate Lens E-mail: [e-mail]
*3 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-