Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
The LEDWP-600E-M-6C Magnetic Mount LED Flood Light offers high light output from a compact form factor and is designed to
provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood
beam without the high heat, fragile construction, or high energy costs of incandescent lighting.
The LEDWP-600E-M-6C LED flood light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120 VAC.
The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a
500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining
forward, the center board is concentrated to go straight out while the boards on the side are 45° offset. This LED wall pack is designed to
withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.
Upper Bracket Position Click Images to Enlarge Adjusted Upwards
Lower Bracket Position Mounted to a Metal Wall Lens Hood Removed
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current is applied and emit light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
The LEDWP-600E-M-6C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and
resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp
assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector
provides a secure and sealed power connection point and rounds out this unit's weather resistant construction. An optional glare shield it shipped
with this light.
Mounting hardware for the LEDWP-600E-M-6C consists of a stainless steel coated bracket with 200lb grip magnetic base and stainless steel