Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Adjustable tension hinge bracket with thru-holt
hole on the HML-5-PGM.
This image shows a dark road, illuminated by
the moonlight and a distant street light.
This image shows the HML-5M illuminating the
same dark road as above, easily reaching
distances of up to 500'
Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge
The light head is constructed of injection molded ABS plastic and fitted with a impact and shatter resistant polycarbonate lens. The sand, UV, and
weather resistant spotlight housing effectively dissipates heat while providing weather protection for the toggle switch, internal H3 lamp, and
fixture wiring harness. The unique design of the spotlight housing enables continuous use in the most inclement weather conditions without risk
of corrosion or damage.
The HML-5-PGM has a 21 foot cord with ring terminals for direct battery connection and connects to the pigtail off the back of the light via 2-pin
molded SAE connector. A simple on/off toggle switch is conveniently located within reach of the solid polypropylene handle. This light is
waterproof and sand and UV resistant. Mounting consists of steel hinge with pre-drilled 3/8" thru-hole for carriage/mounting bolts.
Note On Voltage: Most vehicles are 12 Volts DC. 24 Volts DOES NOT mean more power. Running a 24V light from a 12V power source will
result in a very dim or non-functioning light, and may cause internal damage to the light as well. For common vehicle use, please order 12V.