Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Remote Operation: Remote control functions include on/off, and 4 buttons which control up, down, left and right movement. The light will
continue movement as long as the buttons are depressed. Releasing the buttons stops movement and holds the Golight in position. A fast and
slow mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are depressed. Holding the button for 12
seconds in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and is
approximately 35 seconds for full rotation and 20 seconds for one full range of tilt.
Durability: The GL-3151H-M HID Golight Stryker is designed for hunting and demanding outdoor use with a weather resistant housing
constructed of high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and
abusive conditions. This particular Golight Stryker has a durable black finish, making it ideal for boats and vehicles where an attractive
appearance is desired. Also available are white, camouflage, and chrome finishes. Remote movement of this spotlight is provided by an
automotive grade internal motor, gear, and transmission assembly that is constructed of LEXAN, brass, and stainless steel to provide rust and
corrosion resistance as well as long life and reliable operation.
Magnetic Mounting: This light mounts using our magnetic mounting system consisting of a magnetic base encapsulated in soft rubber which
prevents scratching of vehicle finishes and allows it to adapt to uneven vehicle surfaces for a secure grip. The magnetic base is water tight,
sealed against intrusion from dust and dirt, and has 100 pounds of gripping force. This base has been tested to 60 mph to ensure effective
stability at highway speeds and includes a rubber cord grip for secure power connections.
Power: This Golight is connected to power through a detachable 16 foot, 16 AWG zip cord terminated with a cigarette plug. This cord can be
attached and detached from from the light via a 2 pin molded, weatherproof connector that connects the cord to the Golight’s integral 1 foot
pigtail wire. This cord and magnetic mounting system allows easy setup of the light on vehicles and equipment. Operators can simply detach the
light from the vehicle, unplug the cord, and switch the light to another vehicle in a matter of minutes, or simply stow the light for extended storage
or to prevent theft. This light operates with 12 volts DC and draws 3 amps after an initial 7.2 amps - 60 second startup amp draw, making it ideal
for vehicles, boats, ATVs, and similar sources of 12 volt direct current.
Light Output: The lamp in this Golight Stryker is a 35 watt high intensity discharge bulb which produces 3,000 lumens, or a 15 million retail
candle power rating. This bulb is paired with a tight focus reflector and thick glass lens to produce a narrow spot beam 5,331 feet in length. This
lamp has a 4100K color temperature, giving it very good color rendering and contrasting properties and the ability to clearly and sharply
illuminate objects at long distances. This beam is effective to the far end of its reach, producing enough illumination to read a book by at 5300
feet.
This high power HID GOlight Stryker is ideal for hunting, security, boating, law enforcement, emergency services, utilities, and anywhere high
power and remote control functionality are desired. This unit produces a more powerful and far reaching beam than halogen spotlights and uses
less power on a 12 volt system, making it well suited to vehicles and boats where power supply is limited.