Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Class 1 Div 2 LED Pivoting Light - 2 foot 3 lamp - Offshore LED Rig Light Fixture
Part #: HAL-24-3L-LED-BMSW
Made in the USA
The Larson Electronics HAL-24-3L-LED-BMSW Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating, and ideal for hazardous locations where flammable
chemical/petrochemical vapors may be occasionally encountered.
The HAL-24-3L-LED-BMSW fixture is a 2 foot long, 3 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area LED light that
takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A
temperature rated and comes standard with our high power 15 watt LED lamps. The lamps are protected by a powder coated aluminum frame
and shatter and heat resistant clear acrylic lens secured with four zinc coated steel draw latches.
The fixture is constructed of copper free aluminum alloy and powder coated. The lamp reflector is corrosion resistant heavy gauge aluminum and
coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL
1598A Marine Type approved for use in marine environments. The HAL-24-3L-LED-BMSW is weatherproof and provides operators in hazardous
locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally
be present.